 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 by Staff Writers Paris (ESA) Apr 07, 2021
Ariane 6 early combined tests at Latesys in Fos-sur-Mer, in France, have simulated the moment of liftoff when the umbilicals separate from the launch vehicle. These tests are part of the critical path towards the first flight of Europe's new Ariane 6 launch vehicle. They validate the interfaces and mechanical behaviour during separation of this complex cryogenic connection system. More extensive combined tests will be carried out at Europe's Spaceport in Kourou, French Guiana which will include the fluidic supplies. The cryogenic connection system sustains the launch vehicle on the launch pad during the countdown to launch. Umbilicals supported by 'cryo-arms' on the main mast, supply Ariane 6 with top-up fuel, maintain the correct pressurisation of Ariane 6's tanks, cool the engines before ignition and generally keep the launch vehicle in an optimal condition right up to the point of liftoff. The same umbilicals allow the fuel to be drained safely if a launch is aborted. "At the moment of liftoff, it is paramount that the connections between launch vehicle and launch base are disconnected and pulled away quickly and safely," explained Luis Escudero, ESA's Core Future Launch Preparation Programme Manager. "Pyrotechnic actuators detonate to burst hinges open allowing the umbilicals to safely separate from Ariane 6. The supporting cryo-arms that hold the upper umbilicals then move out horizontally away from the launch vehicle. A 50-tonne counterweight inside the mast - as heavy as a humpback whale - speeds up this manoeuvre. "At the same time, steel doors slam shut on the mini-masts at the base of Ariane 6 on the launch pad to shield the connectors from the rocket exhaust. "This all happens in split seconds in a highly precise, synchronised sequence." The launch base design is improved for Ariane 6. The disconnect time is now faster than it is for Ariane 5. This means the sequence can be triggered at the latest possible moment in the countdown reducing the chance of unnecessary disconnects on an aborted launch. Over the last few months, Latesys under CNES responsibility and with the support of ArianeGroup, have performed tests to validate the disconnection and retraction functions of the launch pad mechanical systems and the mounts between launch base and rocket, and verified mechanical loads. These tests involved the cryo-arms which connect to the Ariane 6 upper stage; mini-masts fixed to the launch table connected by umbilicals to the lower stage; and other Ariane 6 connections. ESA has overseen these tests and analysed the results to verify and validate the cryogenic connection system. Following these tests, the components were dismantled and will be shipped to Kourou for integration on the launch pad. Here they will be reassembled and further tested in combination with the cryogenic systems that will supply liquid oxygen and liquid hydrogen to the launch vehicle. A launch base technical qualification followed by combined tests at the Spaceport lasting several months will prepare for the launch system technical qualification and debut flight of Ariane 6. "These tests were a vital link in a chain of test campaigns that move us forward to further combined tests in French Guiana. This is a very positive step forward for Ariane 6," commented Pier Domenico Resta, ESA's Ariane 6 Launch System Engineering Manager.
Processing begins with the Pleiades Neo 3 satellite for Arianespace's next Vega launch Kourou, French Guiana (SPX) Mar 26, 2021 Payload preparations have begun in French Guiana for Arianespace's next mission - which is to utilize the light-lift Vega in deploying the first Pleiades Neo constellation satellite and other passengers in a piggyback configuration. Produced by Airbus Defence and Space, Pleiades Neo 3 arrived yesterday at Felix Eboue Airport near Cayenne, then traveled by road to the Spaceport to begin its processing. Liftoff of this Vega mission - designated Flight VV18 in Arianespace's launcher family numbering ... read more
|
|||||||||||||
|
|
| The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us. |
del.icio.us
Digg
Reddit
Google
