The ongoing fraud investigation into the nearly $7 billion Mississippi clean coal plant has sparked debate on whether carbon capture is a viable technology. But to lesser fanfare, other industrial efforts to keep carbon dioxide out of the atmosphere are moving forward successfully.

Now scientists report in ACS' journal Industrial and Engineering Chemistry Research a new approach to accomplishing this while also cleaning up waste from the marble industry.

Many countries including the U.S. are pursuing carbon capture as part of their strategy to reduce global emissions of carbon dioxide (CO2), a major greenhouse gas. One of the most promising technologies to do this is called calcium looping.

The process scrubs CO2 from flue gases by using calcium-oxide-based sorbents. But current sorbents - natural or synthetic - are either expensive or lose their effectiveness over many cycles. So scientists are investigating alternate materials, including industrial byproducts.

If successful, this route could help clean up both carbon emissions and waste at the same time. Carla I.C. Pinheiro and colleagues wanted to test this strategy using the powder waste created in large amounts by cutting and polishing marble, a popular stone for such uses as countertops and flooring.

In lab-scale testing, the researchers found that waste marble powder performed better than a current commercial calcium-carbonate sorbent as a material for capturing CO2.

The marble powder initially showed about 90 percent of carbonation conversion compared to 78 percent by the commercial sorbent. And over 10 cycles of reuse, the powder sorbent's reactivity declined by about 36 to 44 percent while the commercial material's performance dropped by 50 percent.