Energy News  
ENERGY TECH
Round-the-clock power from smart bowties
by Staff Writers
Thuwal, Saudi Arabia (SPX) Feb 13, 2018

Overlapping metal arms shaped like a bowtie form a 'rectenna' that captures free, renewable infrared energy. Image courtesy 2017 Atif Shamim.

Most sunlight striking the Earth is absorbed by its surfaces, oceans and atmosphere. As a result of this warming, infrared radiation is emitted constantly all around us - estimated to be millions of Gigawatts per second. A KAUST team has now developed a device that can tap into this energy, as well as waste heat from industrial processes, by transforming quadrillionth-of-a-second wave signals into useful electricity.

Unlike solar panels that are limited by daylight hours and weather conditions, infrared heat can be harvested 24 hours a day. One way to achieve this is to treat waste or infrared heat as high-frequency electromagnetic waves. Using appropriately designed antennas, collected waves are sent to a rectifier, typically a semiconductor diode, that converts alternating signals to direct current charge for batteries or power devices.

Putting these 'rectenna' designs into practice has been difficult. Because infrared emissions have very small wavelengths, they need micro- or nanoscale antennas that are not easy to fabricate or test. Additionally, infrared waves oscillate thousands of times faster than a typical semiconductor can move electrons through its junction.

"There is no commercial diode in the world that can operate at such high frequency," says Atif Shamim, project leader from KAUST.

"That's why we turned to quantum tunneling."

Tunneling devices, such as metal-insulator-metal (MIM) diodes, rectify infrared waves into current by moving electrons through a small barrier. Since this barrier is only a nanometer thin, MIM diodes can handle high-frequency signals on the order of femtoseconds. To generate the intense fields needed for tunneling, the team turned to a unique 'bowtie-shaped' nano-antenna that sandwiches the thin insulator film between two slightly overlapped metallic arms.

"The most challenging part was the nanoscale overlap of the two antenna arms, which required very precise alignment," says postdoctoral researcher, Gaurav Jayaswal.

"Nonetheless, by combining clever tricks with the advanced tools at KAUST's nanofabrication facility we accomplished this step".

By choosing metals with different work functions, the new MIM diode could catch the infrared waves with zero applied voltage, a passive feature that switches the device on only when needed. Experiments with infrared exposure revealed the bowtie successfully harvested energy solely from the radiation, and not from thermal effects, as evidenced by a polarization-dependent output voltage.

"This is just the beginning - a proof of concept," says Shamim.

"We could have millions of such devices connected to boost overall electricity generation."

Research paper


Related Links
King Abdullah University of Science and Technology
Powering The World in the 21st Century at Energy-Daily.com


Thanks for being here;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor
$5 Billed Once


credit card or paypal
SpaceDaily Monthly Supporter
$5 Billed Monthly


paypal only


ENERGY TECH
Recycling and reusing worn cathodes to make new lithium ion batteries
San Diego CA (SPX) Feb 12, 2018
Nanoengineers at the University of California San Diego have developed an energy-efficient recycling process that restores used cathodes from spent lithium ion batteries and makes them work just as good as new. The process involves harvesting the degraded cathode particles from a used battery and then boiling and heat treating them. Researchers built new batteries using the regenerated cathodes. Charge storage capacity, charging time and battery lifetime were all restored to their original levels. ... read more

Comment using your Disqus, Facebook, Google or Twitter login.



Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle

ENERGY TECH
Ozone at lower latitudes not recovering, despite ozone hole healing

NASA Space Sensors to Address Key Earth Questions

Ozone layer declining over populated zones: study

Scientists explain the impacts of aerosol radiative forcing

ENERGY TECH
Europe claims 100 million users for Galileo satnav system

Airbus selected by ESA for EGNOS V3 program

Pentagon probes fitness-app use after map shows sensitive sites

China sends twin BeiDou-3 navigation satellites into space

ENERGY TECH
Cambodian soldier detained after forest patrol deaths

Plan to protect Indonesian peatlands with aerial mapping wins $1m

Deforestation destroys more dry forest than climate change

Forest conservation can have greater ecological impacts by allowing sustainable harvesting

ENERGY TECH
Calculating the CO2 emissions of biofuels is not enough

Bio-renewable process could help 'green' plastic

To maximize sugarcane harvesting, use the right blade

The making of biorelevant nanomaterials

ENERGY TECH
NREL scientists demonstrate remarkable stability in perovskite solar cells

Smart new method to manufacture organic solar cells

Production of solar fuels inches closer with discovery by Caltech scientists

New approach could quickly identify best organic solar cell mixtures

ENERGY TECH
Ireland pushing for greener economy

China wind turbine-maker guilty of stealing US trade secrets

Scotland sets up $83 million low-carbon fund

German offshore wind farm closer to powering mainland

ENERGY TECH
Australia won't fund mega Adani mine rail link

New York unveils plans for fossil fuel divestment

French energy company EDF to replace coal in China

Poland opens Europe's largest coal-fired power unit

ENERGY TECH
Mercedes apologises to China after quoting Dalai Lama

'Gotta find a way': Chinese rap in crisis after crackdown

Hong Kong schools shut over deadly flu outbreak

Vatican's delicate China mission runs into trouble









The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.